A Green House Construction Plan Makes Building Easier
Want More Green House Construction Plan Information?
Use The Search Box Below:
Provided By:
www.freegardeningtip.net
|
|
Nothing is more satisfying than watching your idea come to life and the same is true by seeing your green house construction plan go from the drawing board to finished project. There are many considerations that need to be a part of the green house construction plan; one of the most important is location.
Sunlight throughout the day is considered best, according to the West Virginia University Extension Service but an eastern morning exposure is best for most plants. Placing them near trees, such as maple and oak, may provide shade from the heat of the late day sun during the summer; just make sure they do not shade the green house in the mornings.
Your green house construction plan changes considerably with your choice of design. Lean-to, free-standing and window units are some of the options as are frames design. Lean-tos are basically a half a green house attached to a building. Being able to build it around an existing door aids in being close to electric and water sources they are also limited in available space.
Many Options Need To Be Part of Plan
The shape of your green house is a major part of your green house construction plan as it will dictate other portions of construction. A rigid frame, more square or rectangular provides more interior rood while a Quonset shape, wit its rounded roof is better at reducing build up of snow and water.
The A-frame looks nice for the simplicity of a green house construction plan, but with the sharply angles roof it loses interior space. The gothic design, similar in shape to the Quonset, has a slightly pointed peak and also has much wasted space inside.
While the post and rafter is another simple design for a green house construction plan, it requires more supporting materials to stand up to the force of rafter pushing against the sidewalls. It also is more subject to damage from high winds unless braced properly.
The green house coverings should be detailed in your green house construction plan whether you choose glass, fiberglass, film plastic or double-wall plastic. Although polycarbonate tends to yellow quicker than glass, an ultraviolet light inhibitor is usually mixed in during manufacturing to reduce that from happening when it’s planned for outdoor use.
Other considerations are the foundation and floors, environmental systems, heating and ventilation.
|
|
|
|
|
|